350 × 320 × 325
Maximum build volume in millimetres. Larger parts are split and bonded, and we will tell you where the seam falls.
On-demand 3D printing
Upload A Model, Get A Price In Seconds
Drop in an STL, OBJ or 3MF and we read the mesh in your browser — volume, bounding box and the material it will really use. Choose a filament, tune the settings and the quote updates as you type.
Nothing is uploaded to a server while you are quoting — the mesh is measured locally on your machine.
Instant quote
Configure Your Printed Part
Material, machine time and finishing, itemised so you can see where the money goes.
Materials
Twelve Filaments Priced Per Kilo
Everything below is stocked in the studio and dried before it goes on a machine. Ask if you need something exotic — we can usually source it in a week.
| Filament | Density | Price / kg | Max temp | Best for |
|---|---|---|---|---|
| Loading filament list... | ||||
Machine time is charged at $2.40 per hour, with a $6.00 setup fee per order and a $12.00 order minimum. Prices in USD, shipping calculated at checkout.
The workshop
What The Machines Can Actually Do
0.08 mm
Finest layer height available on request for miniatures and detailed display pieces.
±0.15 mm
Typical dimensional tolerance on well designed parts. Tell us which faces matter and we will orient around them.
6 machines
Enclosed, filtered and calibrated weekly, so a batch of fifty comes out looking like a batch of fifty.
Print guidelines
Getting A Part That Works First Time
How accurate is the instant quote?
We read the real mesh volume and bounding box, then model material and machine time from it. In practice the quote lands within about 10% of the slicer. If it drifts further we honour the quoted price on the first order.
Which file should I send?
3MF is best because it carries units and orientation. STL and OBJ are fine. STEP files are quoted by hand because they need converting first, so use the manual volume box and we will confirm.
What wall thickness should I design to?
Keep walls at or above 1.2 mm, ideally a multiple of 0.4 mm. Anything thinner is not reliably printable and will be flagged before we start.
Do you print functional and outdoor parts?
Yes. PETG and ASA hold up outdoors, ASA best of all under UV. For heat or load, look at polycarbonate or carbon-filled nylon and tell us the working temperature.
Can you help with the design?
We do light CAD work at $55 an hour, from fixing non-manifold meshes to modelling a bracket from a sketch and a set of measurements.
What about tolerances for fits?
Allow 0.2 mm clearance for a sliding fit and 0.1 mm for a press fit. If a part must mate with hardware, send the part number and we will test print the interface.
Prototype Today, Batch Next Week
Send one part to check the fit, then come back for fifty. The setup is already done and the price drops with every extra.